|
The Power Nester was designed to meet the demand for a more
automated box inverter. The Power Nester allows the forklift operator
to close the arms, raise the outer ring, rotate it and lower it over
the inner ring without leaving the forklift or requiring assistance.
This is accomplished by the use of a control box conveniently located
on the cage of the forklift. The operator can also stop the rotation at
any time, allowing for the inspection, cleaning, etc. of the box. The
12-volt gear drive motor is equipped with a torque limiter containing a
breakaway. This breakaway substantially reduces the possibility of
injury and/or damage to the box.
The design of the Power Nester allows the forklift operator
good mobility in tight quarters. The arms are fitted with special
polyurethane fingers that engage the box as the arms are closed. The
Power Nester will square and align the box prior to closing the arms.
Also the sleeves, which receive the forks, are tapered for ease of
installation of the forklift.
Removing the Power Nester from the forklift is quick and
easy. Just disconnect the power cord from the control box, set the
Power Nester down and back away. Note that the Power Nester is
self-standing.
If the Power Nester is to be used on an electrical forklift,
a pre-wired D.C. converter is available.
|
 |
Power Nester
Please pause while the pictures rotate
Please watch the video of the Power Nester in action. For smooth
viewing on slower Internet connections click here.
You may need to right click the link and choose "Save As"
to download the file properly.
|
